1414 N4 PHSS Series 316 Stainless Steel Enclosures - NEMA 4X Continuous Hinge, Clamped Cover << Home << Corrosion Resistant Enclosures <<  Application   Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion may be a problem.   Standards UL 508 Type 3R, 4, 4X, 12 and 13 CSA Type 3R, 4, 4X, 12 and 13 Complies with NEMA Type 3R, 4, 4X, 12 and 13 JIC EGP-1-1967 IEC 60529, IP66     Construction Formed from 14 gauge Type 304 stainless steel without knockouts, cutouts or holes. Smooth, continuously welded seams. Welded brackets provide for enclosure mounting. Continuous stainless steel hinged cover is secured with stainless steel clamps and screws. Oil resistant gaskets are permanently secured. All models include a removable 14 gauge inner panel. Tapped studs are provided for mounting inner panels. A bonding stud is provided on the door and a grounding stud is provided in the enclosure.   Finish Cover and enclosure are natural stainless steel with a smooth brushed finish. Removable inner panel is finished in white powder coating.   Accessories N/A   Back to Top     Part No. A B C Panel Size F G H J L Cover Dimensions T V Y Ship Wt. (lbs) w/ Panel D E 1414N4PHS16C4 6 4 4.0 4.88 2.88 3.50 6.75 2 3.6 7.5 6.31 4.31 3 0.31 0.56 5 1414N4PHS16E 6 6 4.0 4.88 4.88 3.50 6.75 4 3.6 7.5 6.31 6.31 5 0.31 0.56 6 1414N4PHS16G 8 6 3.5 6.75 4.88 3.00 8.75 4 3.1 9.5 8.31 6.31 5 0.25 0.63 6 1414N4PHS16I 10 8 4.0 8.75 6.88 3.50 10.75 6 3.6 11.5 10.31 8.31 7 0.25 0.63 10 1414N4LPHS16K 12 10 5.0 10.75 8.88 4.50 12.75 8 4.6 13.5 12.31 10.31 9 0.25 0.63 15 1414N4PHS16L6 12 12 6.0 10.75 10.88 5.50 12.75 10 5.6 13.5 12.36 12.31 11 0.25 0.63 20 1414N4PHS16M6 14 12 6.0 12.75 10.88 5.50 14.75 10 5.6 15.5 14.31 12.31 11 0.25 0.63 21 1414N4PHS16O6 16 14 6.0 14.75 12.88 5.50 16.75 12 5.6 17.5 16.31 14.31 13 0.25 0.63 26