|
|
| Application |
| |
- Designed to house electrical, electronic,
hydraulic or pneumatic controls and instruments.
- Provides protection where equipment may be
hosed down or otherwise be very wet, or in
specific applications where corrosion is a serious
problem.
|
| |
| Standards |
- UL 508 Type 3R, 4, 4X, and 12
- CSA Type 3R, 4, 4X, and 12
- Complies with
- NEMA Type 3R, 4, 4X, 12 and 13
- JIC EGP-1-1967
- IEC 60529, IP66
|
| |
| Construction
|
- Formed 12 gauge 304 stainless steel.
- Smooth, continuously welded seams without
knockouts, cutouts or holes.
- Body stiffeners are provided in the larger
enclosures for extra rigidity.
- Heavy duty nickel plate/chrome coated lifting
eyebolts are provided with reinforcing support
angles.
- Center post is removable for easy installation
of the inner panel.
- Formed lip on door and top of enclosure
opening exclude flowing liquids and contaminants.
- Continuously hinged doors may be removed by
pulling the stainless steel hinge pin.
- Doors are secured with heavy duty stainless
steel clamps.
- Provision for padlocking.
- 12" floor stands are welded to the enclosure.
- Oil resistant gaskets are permanently secured.
- Panel supports are provided for easy panel
installation.
- Collar studs are provided for mounting inner
panels.
- A bonding stud is provided on the door and a
grounding stud is provided in the enclosure for
each door.
- A literature pocket is provided.
|
| |
| Finish |
- Cover and enclosure are natural stainless
steel with a smooth brushed finish.
- Removable inner panel is finished in white
powder coating.
|
| |
| Accessories |
| N/A |
|
|
|
