Polyester Enclosures - NEMA 4X PJFS Series - Continuous Hinge Freestanding << Home << Corrosion Resistant Enclosures <<    Application   Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. Provides outstanding insulation and protection where equipment may be hosed down or be very wet. Ideal in applications with high temperatures or highly corrosive environments.   Standards UL/cUL 508 Type 1, 2, 3, 4, 4X, 12 and 13 CSA Type 1, 2, 3, 4, 4X, 12 and 13 Complies with NEMA Type 1, 2, 3, 4, 4X,12 and 13 IEC 60529, IP66   Construction Fiberglass polyester enclosure with matching door is easily punched, cut, or drilled. Enhanced UV inhibitors protect against outdoor weathering. Collar Studs are provided for optional inner panel. Mounting hardware included. Heavy duty continuous 304 SS Hinge. Flexible self-gripping gasket compresses over flange for tight seal. 3-point SS handle with pad lock provision. Molded in drip shield. Fiberglass mounting strut side walls on double door unit. Operating temperatures between 130°C and -40°C (266°F to -40°F). Impact index of 6.78J (5 ft/lb). For corrosion resistance information, please refer to table in the Technical Information section.   Finish Fiberglass polyester material has a gray finish. Optional inner panels are available in white powder coated finished steel.  Accessories     N/A     Back to Top       Single Door Part No. Height Width Depth Ship Wt (lbs) PJFS722525 72.00 25.00 24.50 215.00   Double Door Part No. Height Width Depth Ship Wt (lbs) PJFS724925DD 72.00 48.00 24.50 430.00   Inner Panel - Painted Steel - Qty 1 Required Part No. Height Width Finish 18P5721 57.00 21.00 White   Inner Panel - Painted Steel - Qty 2 Required Part No. Height Width Finish 18P5721 57.0 21.00 White