|
|
| Application |
|
- Designed to house Industrial control,
instrumentation, pneumatic, valve and pump control
systems.
- Excellent protection against corrosion and
ultra violet rays making this a suitable enclosure
for outdoor installations.
- High resistance to impact and temperature for
industrial installations when subjected to
frequent water exposure.
|
| |
| Standards |
- UL/cUL 508 Type 1, 2, 3, 4, 4X, 12 & 13
- Complies with
- NEMA 1, 2, 3, 3R, 3S, 4, 4X, 12, 13
|
| |
| Construction
|
- Fiberglass reinforced polyester is self
extinguishing and has operating temperatures of
-50°C to 150°C (-58°F to 302°F).
- One piece monoblock body.
- Entire enclosure can be reversed to allow door
to swing right or left.
- Built-in canopy at top and bottom protects the
door and gasket and allows reversibility.
- Self-ventilating openings are located at the
rear of the enclosure to permit installation of
breather or pressure compensation plugs.
- Internal stainless steel hinges, built into
the door with captive pins.
- Door opening of over 180°.
- Quarter turn fasteners are located outside the
gasketed area.
- Grid pattern is provided on inside door area
for ease of locating equipment.
- Tamperproof "double bar" quarter turn
fasteners.
- Dielectric rigidity > 5kV insulating
resistance > 5 MW.
- For corrosion resistance information, please
refer to table in the Technical Information
section.
|
| Application |
| |
- Designed to house Industrial control,
instrumentation, pneumatic, valve and pump
control systems.
- Excellent protection against corrosion and
ultra violet rays making this a suitable
enclosure for outdoor installations.
- High resistance to impact and temperature
for industrial installations when subjected to
frequent water exposure.
|
| |
| Standards |
- UL/cUL 508 Type 1, 2, 3, 4, 4X, 12 & 13
- Complies with
- NEMA 1, 2, 3, 3R, 3S, 4, 4X, 12, 13
|
| |
| Construction
|
- Fiberglass reinforced polyester is self
extinguishing and has operating temperatures
of -50°C to 150°C (-58°F to 302°F).
- One piece monoblock body.
- Entire enclosure can be reversed to allow
door to swing right or left.
- Built-in canopy at top and bottom protects
the door and gasket and allows reversibility.
- Self-ventilating openings are located at
the rear of the enclosure to permit
installation of breather or pressure
compensation plugs.
- Internal stainless steel hinges, built
into the door with captive pins.
- Door opening of over 180°.
- Quarter turn fasteners are located outside
the gasketed area.
- Grid pattern is provided on inside door
area for ease of locating equipment.
- Tamperproof "double bar" quarter turn
fasteners.
- Dielectric rigidity > 5kV insulating
resistance > 5 MW.
- For corrosion resistance information,
please refer to table in the Technical
Information section.
|
| |
| Finish |
- Fiberglass polyester material is finished
in RAL 7032 beige.
- Optional inner panels are available in
white powder coated finished steel or
unfinished aluminum.
|
| |
| Accessories |
| N/A |
|
|
|
