PJ Series Polyester Modular Enclosures
NEMA 4X - Lift Off and Hinged Screw Cover

<< Home << Corrosion Resistant Enclosures << 

Application

  • Designed for use as instrument enclosures, electric, hydraulic or pneu­matic control housings, electrical junction boxes or terminal wiring enclosures.
  • Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
  • Ideal in applications with high temperatures or highly corrosive environments.

Standards

  • UL 508 Type 1, 2, 3, 4, 4X, 12 and 13
  • CSA Type 1, 2, 3, 4, 4X, 12 and 13
  • Complies with
    • NEMA Type 1, 2, 3, 4, 4X,12 and 13
    • IEC 529, IP66

Construction

  • Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
  • Standard JIC sizes under 18" x 16".
  • 10-32 threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware included.
  • Cover is fastened with captive stainless steel screws in threaded brass inserts.
  • Captive oil resistant gasket provides a positive seal.
  • Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
  • Stainless steel mounting brackets and hardware are provided for mounting feet to the rear of the enclosure.
  • Operating temperatures between 130°C and -40°C (266°F to -40°F).
  • Impact index of 6.78J (5 ft/lb).

Finish

  • Fiberglass polyester material has a medium gray finish.
  • Optional inner panels are available in white powder coated finished steel or unfinished aluminum.
 
 
 
 
 
 
Accessories
  • Painted steel inner panels
  • Unfinished aluminum inner panels
  • Terminal kit assemblies
  • Viewing windows
 
Back to Top
 
Lift Off Ship Cover Part No. Hinged Cover Part No. Enclosure Dimensions Panel Dimensions   Centers   Cover Dimensions Opt Steel Panel Part No.1 Ship Wt. Lbs.
A B C D E F G H J S Z L T V U W